HDMI Type A Test Adapter
The HDMIA-TPA-PRRCE test adapter kit or test fixture kit facilitate HDMI CTS 1.3c Source and Sink compliance testing. The fixture kit also facilitates HDMI cable testing.
Key Electrical:
4.95 Gb/s and 10.2 Gb/s data rates supported
Insertion loss < -3 dB @ 9.6 GHz mated plug and receptacle fixtures
Return loss < -20dB @ 3.3 GHz mated plug and receptacle fixtures
Differential Impedance 100 +/- 5 ohms (wo HDMI Connectors)
Single Ended Impedance 50 +/- 2.5 ohms (wo HDMI Connectors)
Key Mechanical:
High performance .086" Flexible SMA coaxial cables
All critical components are enclosed to facilitate robustness
Coax cables are enclosed in a rotation compliant strain relief
Coax cables are axially retained in the fixture enclosure
|
HDMIA-TPA-PPRCE (kit # 640-0016-000)
|
Calibration Module:
Use to compensate for test fixture losses and phase delay
SHORT, OPEN, LOAD, 2X, and 1X Structures
2X THRU insertion loss < -3 dB @ 18.7 GHz
2X THRU return loss < -20dB @ 13.2 GHz
Optional dual calibration cables available
|
Differential Insertion Loss (SDD21) with mated plug and receptacle test fixtures. Measurement does not include test fixture calibration.
|
10.2 Gbs Eye (PRBS 2^11-1) (SDD21) with mated plug and receptacle test fixtures. Measurement does not include test fixture calibration.
|
Differential Return Loss (SDD11) with mated plug and receptacle test fixtures. Measurement does not include test fixture calibration.
|
| 
)
)
)
)